Select Page

our products

our products

LAD-TOP Secures Your Fixed Ladders Keeping Your Workers Safe From Falls

LAD-TOP® (ladder tie off post) was designed with one thing in mind: worker safety. OSHA’s Walking Working Surfaces Standard 1910.27 now requires all new fixed ladders over 24 feet to have a ladder safety system in place. We had safety on the mind long before it became a requirement.

ensure the safety of employees

While OSHA’s Walking-Working Surfaces and Personal Fall Protection Systems Final Rule requires ladder safety systems in place for fixed ladders greater than 24 feet in height (and gives existing workplaces two decades to implement them), many of our clients hold themselves at a higher safety standard, installing them on fixed ladders of all heights. A fall of any distance is worthy of prevention.

perform tasks with ease

LAD-TOP® (ladder tie off post) is a ladder stanchion that is bolted to your existing fixed ladder systems. Connect the SRL of your choice to the attachment lug. Your employees simply pull the snap hook from the SRL and attach to either their front or back D-ring of their harness. Once they are connected to the SRL, they can simply climb the ladder, maintaining 3-point contact and 100% tie-off until they safely reach their next walking surface.

LAD-TOP offers full mobility to transfer from the ladder to the platform with ease as opposed to cable ascenders which require a maximum clearance of 9″ from the cable, restricting the employee from transferring without disconnecting.

FEATURES

Easy Installation

LAD-TOP® is self-supporting making it simple to install. Four standard bolts + five minutes and you are done!

Built to a higher standard

There is no standard when it comes to protecting your employees. Our products are built to surpass the minimum standard and are some of the only products designed and tested to comply with OSHA & ANSI Z359.18-2017 standard.
LEARN MORE

Interchangeable SRL

LAD-TOP® is interchangeable with your existing self-retracting lifelines. The product will work with SRLs you already own. You are not limited to where you choose to source them.

industry-leading corrosion protection

LAD-TOP® offers you up to 2.5x corrosion protection with a Duplex coating of hot dip galvanized and powder coated paint of your choosing.

Fits Your Existing Hardware

Two LAD-TOP® options are available: one for front ladder exit and one for side ladder exit.

Affordable USA Quality

LAD-TOP®  is 100% sourced and assembled in the USA. The retail price is $450 Ask us about volume discounts!

Both our products meet ANSI Standard:

ANSI/ASSE Z359.18-2017

ANSI Test Report

Series 1

ANSI Test Report

Series 2

Have a question?

Contact us for more information about how LAD-TOP can keep your employees safe and assist you in meeting safety requirements.

LAD-TOP® (ladder tie off post) is a ladder stanchion that is bolted to your existing fixed ladder systems. Connect the SRL of your choice to the attachment lug. Your employees simply pull the snap hook from the SRL and attach to either their front or back D-ring. Once they are connected to the SRL, they can simply climb the ladder, maintaining 3-point contact and 100% tie-off until they safely reach their next walking surface.

5050 Leonard Futrell Rd.
Paducah, KY 42001